Fiber Laser Savings Calculator


How much could a fiber laser save your shop?

Pick your material and enter a few numbers from your plasma table. Your savings update instantly.

1 · Your plasma today
Includes galvanized.
Thickness you cut most.
IPM
Filled in from Hypertherm cut charts for this material. Change it to match your table.
1987 3000W laser: 1,200 IPM
sheets
5’x10′ sheets.
days
We assume 50 working weeks a year.
Advanced (optional)
$/ hr
Wages plus benefits. U.S. sheet metal average is about $46.60.
hrs
Grinding dross and cleaning edges. Laser edges need little to none.
in
Total cut path on one 5’x10′ sheet. 3,000 in at 400 IPM is 7.5 minutes.
$/ lb
$/ hr
Default: $58 cartridge lasting about 4 arc-hours.
%
Industry range is 3–8%. We default to the low end.
Est. savings per year$0
2 · Your estimated savings
Per month
$0
estimated
Per year
$0
estimated
0 hrsof table time freed every month
At this thickness your plasma cuts about as fast as the laser, so we don’t count any cut-time savings. Savings here come from less scrap, cheaper consumables, and less finishing.
Where the savings come from (per year)
Faster cutting (labor)$0
Cheaper consumables$0
Less scrap (tighter nesting)$0
Less deburring (labor)$0
Laser maintenance (added cost)$0
Estimates only, not a quote. Based on the numbers you enter and industry data. Cut time = inches of cut per sheet ÷ cutting speed (IPM). Plasma speeds default to Hypertherm Powermax45/65 mechanized cut charts (average of best-quality and production settings). Laser speeds come from 1987 Machinery’s 3000W cut parameters for the selected material and thickness, capped at the Open Table Laser’s 1,200 IPM maximum (stainless and aluminum are typically cut with nitrogen assist). Pierce and travel time and laser assist gas (nitrogen/oxygen) are not included. Volume is limited to one 8-hour shift. Also assumes laser consumables of about $1 per cutting hour, $3,000 a year of added laser maintenance (1 shift), and a 5’x10′ sheet; material prices are U.S. market estimates (CRU galvanized coil; Material Price Book 304 stainless and 5052 aluminum sheet, Nov 2026). Labor rate from BLS wage and benefit data. Labor savings from faster cutting count only if the freed table time goes to more output or less overtime. Energy cost is roughly a wash and is not included. Your results will vary.